TreadCompass

Polaris Scrambler Lug Nut Torque

The Polaris Scrambler lug nut torque is 45 ft-lbs (61 N·m) for 2018–2021, 75 ft-lbs (102 N·m) for 2017 and 50 ft-lbs (68 N·m) for 2014–2015; earlier years are listed below. The 2021 XP 1000 S uses 75 ft-lbs. The 2018–2020 XP 1000 uses 75 ft-lbs.

OR PICK YOUR VEHICLE

Polaris Scrambler · 2000–2021

The spec changed over the years. Pick your year above, or find it here:
202145 ft-lbs · 61 N·m
75 ft-lbs (102 N·m) on XP 1000 S
2018–202045 ft-lbs · 61 N·m
75 ft-lbs (102 N·m) on XP 1000
201775 ft-lbs · 102 N·m
2014–201550 ft-lbs · 68 N·m
2000–201150 ft-lbs · 68 N·m
  • ✓ Tighten in a star pattern, in two passes, with a torque wrench (not an impact gun)
  • ✓ Re-check the torque after the first 50–100 miles
  • ✓ Confirm against your owner’s manual; aftermarket wheels can differ

Source: TreadCompass vehicle fitment database. Page updated November 2026. Specs can vary with aftermarket wheels and lug hardware, so always confirm with your owner’s manual.

Other Polaris models

200300330400425450500600700AceOutlawOutlaw 50All Polaris models →

Polaris Scrambler lug nut torque FAQ

What is the lug nut torque for a Polaris Scrambler?

The Polaris Scrambler lug nut torque is 45 ft-lbs (61 N·m) for 2018–2021, 75 ft-lbs (102 N·m) for 2017 and 50 ft-lbs (68 N·m) for 2014–2015; earlier years are listed below. The 2021 XP 1000 S uses 75 ft-lbs. The 2018–2020 XP 1000 uses 75 ft-lbs. Tighten in a star pattern with a torque wrench, then re-check after the first 50–100 miles.

Do all Scrambler trims use the same lug nut torque?

No. Most trims use the standard spec, but the 2021 XP 1000 S uses 75 ft-lbs and the 2018–2020 XP 1000 uses 75 ft-lbs.

Has the Polaris Scrambler lug nut torque changed over the years?

Yes. It is 45 ft-lbs for 2018–2021, 75 ft-lbs for 2017, 50 ft-lbs for 2014–2015 and 50 ft-lbs for 2000–2011. Pick your year above to see the exact spec.

New to torquing wheels? See how to torque lug nuts and common questions.